This is the latest recevied telemetry packets stored in our database for station/object DO4WG-80. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758196359 | 1007.6 hPa | 25.5 C deg | 51.9 % | 1021.4 hPa | 0 C deg |
| 1758194559 | 1007.9 hPa | 22.4 C deg | 62.4 % | 1021.8 hPa | 0 C deg |
| 1758192759 | 1007.9 hPa | 21.6 C deg | 63.5 % | 1021.8 hPa | 0 C deg |
| 1758190959 | 1007.9 hPa | 20.1 C deg | 68.5 % | 1021.9 hPa | 0 C deg |
| 1758189158 | 1007.9 hPa | 19.4 C deg | 70.5 % | 1022 hPa | 0 C deg |
| 1758187358 | 1008 hPa | 18.4 C deg | 74.1 % | 1022.1 hPa | 0 C deg |
| 1758185558 | 1007.8 hPa | 18.4 C deg | 75.4 % | 1021.9 hPa | 0 C deg |
| 1758183758 | 1007.8 hPa | 17.7 C deg | 77.9 % | 1021.9 hPa | 0 C deg |
| 1758181958 | 1007.6 hPa | 17 C deg | 83 % | 1021.8 hPa | 0 C deg |
| 1758180158 | 1007.4 hPa | 16.5 C deg | 85.8 % | 1021.6 hPa | 0 C deg |
| 1758178358 | 1007.3 hPa | 16 C deg | 90.2 % | 1021.5 hPa | 0 C deg |
| 1758176558 | 1006.9 hPa | 15.4 C deg | 93.8 % | 1021.2 hPa | 0 C deg |
| 1758174758 | 1006.9 hPa | 14.8 C deg | 97.9 % | 1021.2 hPa | 0 C deg |
| 1758172957 | 1006.7 hPa | 14.5 C deg | 100 % | 1021 hPa | 0 C deg |
| 1758171157 | 1006.5 hPa | 14.3 C deg | 100 % | 1020.8 hPa | 0 C deg |
| 1758136955 | 1008 hPa | 16.8 C deg | 57.8 % | 1022.2 hPa | 0 C deg |
| 1758135155 | 1007.9 hPa | 17.4 C deg | 55.5 % | 1022 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)