APRS Track Direct

My position About ☰

reset

KU1F-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KU1F-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1786731562	317 Pkts	313 Pkts	126 Pkts	6 C
1786727962	301 Pkts	297 Pkts	135 Pkts	6 C
1786724362	238 Pkts	233 Pkts	55 Pkts	5 C
1786720762	209 Pkts	205 Pkts	34 Pkts	5 C
1786717162	244 Pkts	242 Pkts	66 Pkts	5 C
1786713562	210 Pkts	206 Pkts	38 Pkts	6 C
1786709962	203 Pkts	195 Pkts	40 Pkts	6 C
1786706362	203 Pkts	200 Pkts	39 Pkts	6 C
1786702762	211 Pkts	207 Pkts	40 Pkts	6 C
1786699162	194 Pkts	190 Pkts	36 Pkts	6 C
1786695562	212 Pkts	208 Pkts	42 Pkts	6 C
1786691962	230 Pkts	227 Pkts	41 Pkts	6 C
1786688363	215 Pkts	211 Pkts	39 Pkts	6 C
1786684763	212 Pkts	209 Pkts	36 Pkts	6 C
1786681163	215 Pkts	211 Pkts	35 Pkts	7 C
1786677562	249 Pkts	245 Pkts	38 Pkts	7 C
1786673962	273 Pkts	269 Pkts	42 Pkts	8 C
1786670362	247 Pkts	246 Pkts	34 Pkts	8 C
1786666762	250 Pkts	248 Pkts	53 Pkts	8 C
1786663162	210 Pkts	208 Pkts	45 Pkts	9 C
1786659562	190 Pkts	187 Pkts	33 Pkts	8 C
1786655962	198 Pkts	195 Pkts	28 Pkts	7 C
1786652362	199 Pkts	196 Pkts	33 Pkts	7 C
1786648762	194 Pkts	189 Pkts	45 Pkts	7 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)