This is the latest recevied telemetry packets stored in our database for station/object W1WRA-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782515980 | 20 | 0 | 256 | 0 | 0 |
| 1782515380 | 20 | 0.02 | 252 | 0 | 0 |
| 1782514780 | 20 | 0 | 264 | 0 | 0 |
| 1782514180 | 20 | 0 | 254 | 0 | 0 |
| 1782513580 | 20 | 0 | 264 | 0 | 0 |
| 1782512980 | 20 | 0 | 269 | 0 | 0 |
| 1782512380 | 20 | 0 | 267 | 0 | 0 |
| 1782511780 | 20 | 0.01 | 270 | 0 | 0 |
| 1782511180 | 20 | 0 | 271 | 0 | 0 |
| 1782510580 | 20 | 0 | 281 | 0 | 0 |
| 1782509980 | 20 | 0 | 280 | 0 | 0 |
| 1782509380 | 20 | 0 | 282 | 0 | 0 |
| 1782508780 | 20 | 0 | 284 | 0 | 0 |
| 1782508180 | 20 | 0.02 | 281 | 0 | 0 |
| 1782507580 | 20 | 0.05 | 286 | 0 | 0 |
| 1782506980 | 20 | 0 | 290 | 0 | 0 |
| 1782506380 | 20 | 0.03 | 292 | 0 | 0 |
| 1782505780 | 20 | 0 | 292 | 0 | 0 |
| 1782505180 | 20 | 0 | 304 | 0 | 0 |
| 1782504580 | 20 | 0.01 | 299 | 0 | 0 |
| 1782503980 | 20 | 0 | 299 | 0 | 0 |
| 1782503380 | 20 | 0 | 304 | 0 | 0 |
| 1782502780 | 20 | 0 | 312 | 0 | 0 |
| 1782502180 | 20 | 0.01 | 306 | 0 | 0 |
| 1782501580 | 20 | 0 | 315 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)