This is the latest recevied telemetry packets stored in our database for station/object PY5TH-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758189048 | 24 | 67 | 796 | 6 | 147 |
| 1758188137 | 25 | 66 | 796 | 4 | 147 |
| 1758187228 | 25 | 65 | 795 | 6 | 147 |
| 1758186316 | 25 | 64 | 795 | 9 | 147 |
| 1758185404 | 25 | 63 | 795 | 4 | 147 |
| 1758184494 | 25 | 62 | 795 | 9 | 147 |
| 1758183582 | 25 | 62 | 794 | 6 | 147 |
| 1758182670 | 26 | 63 | 794 | 11 | 147 |
| 1758181755 | 26 | 63 | 794 | 6 | 147 |
| 1758180845 | 26 | 62 | 794 | 9 | 147 |
| 1758179933 | 26 | 62 | 793 | 6 | 147 |
| 1758179023 | 26 | 62 | 793 | 11 | 147 |
| 1758178109 | 27 | 62 | 793 | 6 | 147 |
| 1758177199 | 27 | 61 | 793 | 9 | 147 |
| 1758176285 | 27 | 60 | 792 | 6 | 147 |
| 1758174473 | - | - | - | - | - |
| 1758173558 | 28 | 60 | 792 | 9 | 147 |
| 1758172640 | 28 | 61 | 790 | 10 | 147 |
| 1758171725 | 28 | 61 | 790 | 16 | 147 |
| 1758170808 | 28 | 61 | 790 | 12 | 147 |
| 1758169894 | 28 | 61 | 790 | 16 | 147 |
| 1758168980 | 28 | 61 | 789 | 10 | 147 |
| 1758168069 | 29 | 62 | 789 | 14 | 147 |
| 1758167153 | 29 | 61 | 789 | 14 | 147 |
| 1758166239 | 29 | 61 | 789 | 9 | 147 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)