This is the latest recevied telemetry packets stored in our database for station/object DO6MEY-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1778029851 | 1010.8 hPa | 8 C deg | 89.4 % | 1011.8 hPa | 0 C deg |
| 1778028032 | 1010.9 hPa | 8.2 C deg | 87.8 % | 1011.9 hPa | 0 C deg |
| 1778026217 | 1010.9 hPa | 8.8 C deg | 85.6 % | 1011.9 hPa | 0 C deg |
| 1778024416 | 1011.1 hPa | 9.3 C deg | 97.7 % | 1012.1 hPa | 0 C deg |
| 1778022591 | 1011.3 hPa | 9.9 C deg | 97.3 % | 1012.2 hPa | 0 C deg |
| 1778020781 | 1011.5 hPa | 9.9 C deg | 93.1 % | 1012.5 hPa | 0 C deg |
| 1778017156 | 1011.6 hPa | 10 C deg | 84.6 % | 1012.6 hPa | 0 C deg |
| 1778013573 | 1012 hPa | 9.9 C deg | 85.7 % | 1012.9 hPa | 0 C deg |
| 1778008172 | 1011.8 hPa | 9.9 C deg | 81 % | 1012.8 hPa | 0 C deg |
| 1777997179 | 1012 hPa | 11.9 C deg | 74.6 % | 1013 hPa | 0 C deg |
| 1777993548 | 1012.3 hPa | 13.1 C deg | 69.7 % | 1013.3 hPa | 0 C deg |
| 1777986285 | 1012.8 hPa | 14.4 C deg | 58.5 % | 1013.7 hPa | 0 C deg |
| 1777982656 | 1012.9 hPa | 14.7 C deg | 56.3 % | 1013.9 hPa | 0 C deg |
| 1777979026 | 1013.1 hPa | 13.1 C deg | 60 % | 1014 hPa | 0 C deg |
| 1777968142 | 1013.7 hPa | 10.5 C deg | 79.2 % | 1014.7 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)