APRS Track Direct

My position About ☰

reset

SR0L Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR0L. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	MaxLsb*	MaxMsb*	LastTempr*	Vbatt*
1754165584	98 Raw	28 Raw	10.75 DegC	13.42 V
1754163068	95 Raw	28 Raw	10.5 DegC	13.44 V
1754161798	87 Raw	28 Raw	10.5 DegC	13.46 V
1754159915	68 Raw	28 Raw	9.75 DegC	13.44 V
1754159286	70 Raw	28 Raw	9.75 DegC	13.44 V
1754158028	97 Raw	28 Raw	10.75 DegC	13.1 V
1754157400	102 Raw	28 Raw	11 DegC	13.5 V
1754156770	98 Raw	28 Raw	10.75 DegC	13.5 V
1754155513	104 Raw	28 Raw	11 DegC	13.56 V
1754154883	100 Raw	28 Raw	10.75 DegC	13.52 V
1754152350	93 Raw	28 Raw	10.5 DegC	13.5 V
1754151721	100 Raw	28 Raw	10.75 DegC	13.4 V
1754151092	109 Raw	28 Raw	11.25 DegC	13.04 V
1754150460	130 Raw	28 Raw	12 DegC	13.44 V
1754148573	153 Raw	28 Raw	12.75 DegC	13.78 V
1754147944	162 Raw	28 Raw	13 DegC	13.84 V
1754147315	195 Raw	28 Raw	14.25 DegC	13.78 V
1754146686	179 Raw	28 Raw	13.75 DegC	13.76 V
1754144170	165 Raw	28 Raw	13.25 DegC	13.74 V
1754143541	195 Raw	28 Raw	14.25 DegC	13.98 V
1754142275	175 Raw	28 Raw	13.5 DegC	13.68 V
1754141646	175 Raw	28 Raw	13.5 DegC	13.78 V
1754140388	180 Raw	28 Raw	13.75 DegC	13.8 V
1754138499	139 Raw	28 Raw	12.25 DegC	13.8 V
1754137870	132 Raw	28 Raw	12 DegC	13.8 V

*Used Equation Coefficients:

MaxLsb: 0, 1, 0

MaxMsb: 0, 1, 0

LastTempr: 0, 0.25, -40

Vbatt: 0, 0.02, 10

PtSts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)