APRS Track Direct

My position About ☰

reset

LU3ABU-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU3ABU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Light*	Soil*	Vcc*	Tmp*
1836274501	-6040 mV	-4880 mV	-13.31 V	-254 C
1836274464	5820 mV	4680 mV	12.8 V	-254 C
1836274145	-5640 mV	-5920 mV	-14.34 V	-255 C
1836274108	9560 mV	9960 mV	25.6 V	-254 C
1762366694	-6540 mV	-4980 mV	-14.34 V	-254 C
1762366337	-11960 mV	-9040 mV	-26.62 V	-254 C
1762365981	4980 mV	5000 mV	12.8 V	-255 C
1762365624	4540 mV	5120 mV	12.8 V	-254 C
1762365251	5560 mV	4760 mV	12.8 V	-254 C
1762364894	7960 mV	9140 mV	23.34 V	-254 C
1762364537	4900 mV	5020 mV	12.8 V	-253 C
1762364181	4800 mV	4560 mV	12.8 V	-254 C
1762363824	-5580 mV	-4480 mV	-13.31 V	-254 C
1762363468	2400 mV	2380 mV	6.4 V	-254 C
1762362741	9720 mV	7600 mV	23.34 V	-254 C
1762362384	4780 mV	5080 mV	12.8 V	-254 C
1762362028	9700 mV	9040 mV	23.34 V	-253 C
1762361671	8940 mV	10380 mV	26.04 V	-254 C
1762361315	-6020 mV	-5540 mV	-14.34 V	-254 C
1762360958	5820 mV	4500 mV	12.8 V	-254 C
1762360602	5620 mV	4860 mV	12.8 V	-255 C
1762360245	11400 mV	9020 mV	25.6 V	-254 C
1762359872	-10500 mV	-9480 mV	-26.62 V	-254 C
1762359516	-5920 mV	-5020 mV	-14.34 V	-254 C
1762359159	5720 mV	4520 mV	12.8 V	-254 C

*Used Equation Coefficients:

Light: 0, 20, 0

Soil: 0, 20, 0

RSSI: 0, -1, 0

Vcc: 0, 0.004, 4.5

Tmp: 0, 1, -100

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)