APRS Track Direct

My position About ☰

reset

T79PRS Telemetry

This is the latest recevied telemetry packets stored in our database for station/object T79PRS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1766206427	114 Pkt	850 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766206127	125 Pkt	860 Pkt	1 Pkt	1.03 Pcnt	63 Pcnt
1766205827	140 Pkt	870 Pkt	1 Pkt	1.03 Pcnt	63 Pcnt
1766205527	127 Pkt	850 Pkt	1 Pkt	1.03 Pcnt	63 Pcnt
1766205227	128 Pkt	860 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766204927	144 Pkt	860 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766204627	138 Pkt	870 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766204327	123 Pkt	880 Pkt	1 Pkt	1.03 Pcnt	63 Pcnt
1766204027	133 Pkt	890 Pkt	3 Pkt	1.03 Pcnt	63 Pcnt
1766203727	128 Pkt	890 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766203427	135 Pkt	890 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766203127	139 Pkt	900 Pkt	3 Pkt	1.03 Pcnt	63 Pcnt
1766202827	130 Pkt	900 Pkt	4 Pkt	1.03 Pcnt	63 Pcnt
1766202527	114 Pkt	910 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766202227	131 Pkt	930 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766201927	142 Pkt	940 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766201627	142 Pkt	940 Pkt	3 Pkt	1.03 Pcnt	63 Pcnt
1766201327	152 Pkt	920 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766201027	161 Pkt	930 Pkt	3 Pkt	1.03 Pcnt	63 Pcnt
1766200727	132 Pkt	910 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766200427	134 Pkt	910 Pkt	3 Pkt	1.03 Pcnt	63 Pcnt
1766200127	138 Pkt	900 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766199827	141 Pkt	910 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766199527	152 Pkt	910 Pkt	2 Pkt	1.03 Pcnt	63 Pcnt
1766199227	151 Pkt	910 Pkt	4 Pkt	1.03 Pcnt	63 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)