This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1782485765 | 0 Count | 259 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782482165 | 0 Count | 250 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782478565 | 0 Count | 241 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782474964 | 0 Count | 233 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782471364 | 0 Count | 224 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782467766 | 0 Count | 211 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782464166 | 0 Count | 203 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782460565 | 0 Count | 192 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782456965 | 0 Count | 181 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782453365 | 0 Count | 170 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782449765 | 0 Count | 149 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782446165 | 0 Count | 134 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782442565 | 0 Count | 113 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782438964 | 0 Count | 74 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782435364 | 0 Count | 45 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782431764 | 0 Count | 25 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782428164 | 0 Count | 1013 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782424564 | 0 Count | 990 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782420964 | 0 Count | 982 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782417364 | 0 Count | 973 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782413763 | 0 Count | 964 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782410163 | 0 Count | 956 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782406563 | 0 Count | 948 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1782402963 | 0 Count | 939 Count | 0 Count | 3.93 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)