APRS Track Direct

My position About ☰

reset

SP2RO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1836274693	11 Count	301 Count	0 Count	2.46 VDC
1774081020	23 Count	465 Count	6 Count	2.77 VDC
1774080119	22 Count	434 Count	6 Count	2.75 VDC
1774079218	21 Count	401 Count	6 Count	2.68 VDC
1774078317	20 Count	372 Count	6 Count	2.59 VDC
1774077417	19 Count	323 Count	6 Count	2.48 VDC
1774076516	11 Count	265 Count	0 Count	2.44 VDC
1774075615	10 Count	236 Count	0 Count	2.27 VDC
1774074714	9 Count	194 Count	0 Count	2.33 VDC
1774073813	8 Count	160 Count	0 Count	2.04 VDC
1774072913	7 Count	131 Count	0 Count	1.91 VDC
1774072012	5 Count	98 Count	0 Count	1.67 VDC
1774071149	1 Count	70 Count	0 Count	1.62 VDC
1774070248	0 Count	35 Count	0 Count	1.44 VDC
1774069347	31 Count	1002 Count	2 Count	1.51 VDC
1774068446	30 Count	965 Count	2 Count	1.46 VDC
1774067545	29 Count	935 Count	2 Count	1.39 VDC
1774066645	28 Count	899 Count	2 Count	1.35 VDC
1774065744	27 Count	865 Count	2 Count	1.52 VDC
1774064842	26 Count	829 Count	2 Count	1.34 VDC
1774063942	23 Count	793 Count	0 Count	1.29 VDC
1774063041	22 Count	756 Count	0 Count	1.48 VDC
1774062140	21 Count	719 Count	0 Count	1.42 VDC
1774061239	20 Count	686 Count	0 Count	1.5 VDC
1774060339	19 Count	657 Count	0 Count	1.53 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)