This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750114014 | 1 Count | 65 Count | 1 Count | 4.14 VDC | 0.14 VDC |
| 1750112211 | 38 Count | 1019 Count | 17 Count | 4.16 VDC | 0.14 VDC |
| 1750110409 | 36 Count | 953 Count | 16 Count | 4.17 VDC | 0.14 VDC |
| 1750108606 | 34 Count | 886 Count | 15 Count | 4.18 VDC | 0.14 VDC |
| 1750106803 | 32 Count | 830 Count | 14 Count | 4.12 VDC | 0.14 VDC |
| 1750105001 | 30 Count | 778 Count | 13 Count | 4.15 VDC | 0.14 VDC |
| 1750103198 | 28 Count | 717 Count | 12 Count | 4.13 VDC | 0.14 VDC |
| 1750099593 | 24 Count | 597 Count | 10 Count | 4.23 VDC | 0.14 VDC |
| 1750097823 | 19 Count | 551 Count | 10 Count | 4.12 VDC | 0.14 VDC |
| 1750096019 | 17 Count | 500 Count | 9 Count | 4.14 VDC | 0.14 VDC |
| 1750094216 | 15 Count | 451 Count | 8 Count | 4.16 VDC | 0.14 VDC |
| 1750092414 | 13 Count | 400 Count | 7 Count | 4.13 VDC | 0.14 VDC |
| 1750090611 | 11 Count | 338 Count | 6 Count | 4.21 VDC | 0.14 VDC |
| 1750088808 | 9 Count | 264 Count | 5 Count | 4.11 VDC | 0.14 VDC |
| 1750087006 | 7 Count | 200 Count | 4 Count | 4.17 VDC | 0.14 VDC |
| 1750085203 | 5 Count | 156 Count | 3 Count | 4.21 VDC | 0.14 VDC |
| 1750083400 | 3 Count | 108 Count | 2 Count | 4.11 VDC | 0.14 VDC |
| 1750081597 | 1 Count | 49 Count | 1 Count | 4.2 VDC | 0.14 VDC |
| 1750079794 | 38 Count | 1021 Count | 16 Count | 4.23 VDC | 0.14 VDC |
| 1750077991 | 36 Count | 978 Count | 15 Count | 4.17 VDC | 0.14 VDC |
| 1750076222 | 30 Count | 916 Count | 14 Count | 4.17 VDC | 0.14 VDC |
| 1750074419 | 28 Count | 832 Count | 13 Count | 4.2 VDC | 0.14 VDC |
| 1750070813 | 24 Count | 682 Count | 11 Count | 4.12 VDC | 0.14 VDC |
| 1750067207 | 20 Count | 542 Count | 9 Count | 4.23 VDC | 0.14 VDC |
| 1750065405 | 18 Count | 438 Count | 8 Count | 4.2 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)