APRS Track Direct

My position About ☰

reset

WC4PEM-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Eff1h*	Eff1h*
1732210408	26.5 C	14.03 Volt	270 Pkt	71 Pcnt	71 Pcnt
1732210108	27 C	14.03 Volt	260 Pkt	71 Pcnt	71 Pcnt
1732209809	26.5 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732209808	26.5 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732209508	26.5 C	14.03 Volt	250 Pkt	70 Pcnt	70 Pcnt
1732209210	27.5 C	14.03 Volt	250 Pkt	70 Pcnt	70 Pcnt
1732209208	27.5 C	14.03 Volt	250 Pkt	70 Pcnt	70 Pcnt
1732208908	27 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732208608	27.5 C	13.95 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732208608	27.5 C	13.95 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732208308	27 C	14.03 Volt	260 Pkt	69 Pcnt	69 Pcnt
1732208010	27 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732208008	27 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732207708	27 C	14.03 Volt	260 Pkt	70 Pcnt	70 Pcnt
1732207412	26.5 C	14.03 Volt	260 Pkt	69 Pcnt	69 Pcnt
1732207408	26.5 C	14.03 Volt	260 Pkt	69 Pcnt	69 Pcnt
1732207108	27.5 C	14.03 Volt	260 Pkt	67 Pcnt	67 Pcnt
1732206809	27 C	14.03 Volt	260 Pkt	68 Pcnt	68 Pcnt
1732206808	27 C	14.03 Volt	260 Pkt	68 Pcnt	68 Pcnt
1732206508	27 C	14.03 Volt	270 Pkt	67 Pcnt	67 Pcnt
1732206209	27 C	14.03 Volt	260 Pkt	67 Pcnt	67 Pcnt
1732206208	27 C	14.03 Volt	260 Pkt	67 Pcnt	67 Pcnt
1732205908	27 C	14.03 Volt	270 Pkt	67 Pcnt	67 Pcnt
1732205611	27 C	14.03 Volt	270 Pkt	67 Pcnt	67 Pcnt
1732205608	27 C	14.03 Volt	270 Pkt	67 Pcnt	67 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)