This is the latest recevied telemetry packets stored in our database for station/object VE3HXT-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778025329 | 467 | 599 | 0 | 0 | 0 |
| 1778025210 | 469 | 598 | 0 | 0 | 0 |
| 1778024970 | 470 | 595 | 0 | 0 | 0 |
| 1778024851 | 465 | 594 | 0 | 0 | 0 |
| 1778024732 | 467 | 592 | 0 | 0 | 0 |
| 1778024611 | 466 | 590 | 0 | 0 | 0 |
| 1778024492 | 468 | 588 | 0 | 0 | 0 |
| 1777997605 | 430 | 616 | 0 | 0 | 0 |
| 1777997485 | 465 | 615 | 0 | 0 | 0 |
| 1777997365 | 463 | 614 | 0 | 0 | 0 |
| 1777997246 | 465 | 613 | 0 | 0 | 0 |
| 1777997126 | 468 | 611 | 0 | 0 | 0 |
| 1777997006 | 467 | 610 | 0 | 0 | 0 |
| 1777996887 | 469 | 607 | 0 | 0 | 0 |
| 1777996767 | 470 | 605 | 0 | 0 | 0 |
| 1777994773 | 462 | 606 | 0 | 0 | 0 |
| 1777994645 | 464 | 604 | 0 | 0 | 0 |
| 1777994525 | 472 | 604 | 0 | 0 | 0 |
| 1777994405 | 466 | 601 | 0 | 0 | 0 |
| 1777994286 | 465 | 599 | 0 | 0 | 0 |
| 1777994166 | 466 | 597 | 0 | 0 | 0 |
| 1777994046 | 466 | 594 | 0 | 0 | 0 |
| 1777993927 | 464 | 591 | 0 | 0 | 0 |
| 1777977694 | 469 | 596 | 0 | 0 | 0 |
| 1777977575 | 468 | 595 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)