This is the latest recevied telemetry packets stored in our database for station/object SP2KMH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1782477025 | 12.6 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1782475643 | 12.6 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1782474262 | 12.6 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1782471499 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1782470118 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1782468737 | 12.6 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
| 1782467356 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1782465974 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1782464593 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1782461830 | 12.6 Volt | 20 Pkt | 0 Pkt | 11 Pcnt | 0 None |
| 1782460449 | 12.6 Volt | 20 Pkt | 0 Pkt | 11 Pcnt | 0 None |
| 1782457686 | 12.6 Volt | 0 Pkt | 0 Pkt | 0 Pcnt | 0 None |
| 1782453542 | 12.6 Volt | 180 Pkt | 50 Pkt | 82 Pcnt | 0 None |
| 1782452162 | 12.6 Volt | 240 Pkt | 70 Pkt | 91 Pcnt | 0 None |
| 1782450780 | 12.6 Volt | 210 Pkt | 70 Pkt | 92 Pcnt | 0 None |
| 1782449398 | 12.6 Volt | 210 Pkt | 70 Pkt | 95 Pcnt | 0 None |
| 1782448017 | 12.6 Volt | 190 Pkt | 60 Pkt | 97 Pcnt | 0 None |
| 1782443873 | 12.6 Volt | 180 Pkt | 80 Pkt | 98 Pcnt | 0 None |
| 1782441110 | 12.6 Volt | 150 Pkt | 60 Pkt | 78 Pcnt | 0 None |
| 1782436967 | 12.6 Volt | 40 Pkt | 10 Pkt | 35 Pcnt | 0 None |
| 1782432823 | 12.6 Volt | 0 Pkt | 0 Pkt | 12 Pcnt | 0 None |
| 1782431441 | 12.6 Volt | 0 Pkt | 0 Pkt | 17 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)