This is the latest recevied telemetry packets stored in our database for station/object DL4AXL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732480831 | 20 deg C | 47.5 % | 1014.1 hPa | 0 | 0 |
| 1732479931 | 20 deg C | 47.3 % | 1012.8 hPa | 0 | 0 |
| 1732479031 | 20.1 deg C | 47.2 % | 1014.3 hPa | 0 | 0 |
| 1732478131 | 20 deg C | 47 % | 1013.5 hPa | 0 | 0 |
| 1732477231 | 20 deg C | 47 % | 1014 hPa | 0 | 0 |
| 1732476330 | 20 deg C | 46.8 % | 1012.9 hPa | 0 | 0 |
| 1732475430 | 19.9 deg C | 46.8 % | 1012.7 hPa | 0 | 0 |
| 1732474530 | 19.9 deg C | 46.7 % | 1014.7 hPa | 0 | 0 |
| 1732473630 | 19.8 deg C | 46.3 % | 1014.5 hPa | 0 | 0 |
| 1732472730 | 19.8 deg C | 46.2 % | 1014.7 hPa | 0 | 0 |
| 1732471830 | 19.8 deg C | 46.3 % | 1013.7 hPa | 0 | 0 |
| 1732470930 | 19.9 deg C | 46.2 % | 1015.3 hPa | 0 | 0 |
| 1732470030 | 19.8 deg C | 46.2 % | 1015.5 hPa | 0 | 0 |
| 1732469130 | 19.7 deg C | 46.2 % | 1014.1 hPa | 0 | 0 |
| 1732468230 | 19.6 deg C | 46.4 % | 1013.8 hPa | 0 | 0 |
| 1732467330 | 19.5 deg C | 46.7 % | 1014.6 hPa | 0 | 0 |
| 1732466429 | 19.3 deg C | 46.9 % | 1014.9 hPa | 0 | 0 |
| 1732465529 | 19.1 deg C | 47 % | 1014.7 hPa | 0 | 0 |
| 1732464629 | 19 deg C | 47.2 % | 1012.9 hPa | 0 | 0 |
| 1732463729 | 18.7 deg C | 47.4 % | 1012.8 hPa | 0 | 0 |
| 1732462829 | 18.6 deg C | 47.5 % | 1012.8 hPa | 0 | 0 |
| 1732461929 | 18.4 deg C | 47.6 % | 1013.6 hPa | 0 | 0 |
| 1732461029 | 18 deg C | 47.7 % | 1015.4 hPa | 0 | 0 |
| 1732460129 | 17.8 deg C | 47.9 % | 1013 hPa | 0 | 0 |
| 1732459229 | 17.8 deg C | 47.9 % | 1013.4 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)