This is the latest recevied telemetry packets stored in our database for station/object DH0BRO-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
|---|---|---|---|---|---|
| 1758185422 | 5.1 | 0.1 | 21 | 0 | 0 |
| 1758184222 | 4.6 | 0.2 | 22 | 0 | 0 |
| 1758181873 | 5.1 | 0.1 | 23 | 0 | 0 |
| 1758180673 | 8.1 | 0.2 | 37 | 0 | 0 |
| 1758178227 | 0 | 0.1 | 0 | 0 | 0 |
| 1758177027 | 0 | 0.2 | 0 | 0 | 0 |
| 1758174673 | 6.7 | 0.1 | 30 | 1 | 0 |
| 1758173473 | 7.7 | 0.2 | 28 | 0 | 0 |
| 1758171075 | 12.6 | 0.1 | 51 | 0 | 0 |
| 1758169875 | 12.5 | 0.2 | 54 | 0 | 0 |
| 1758167472 | 0 | 0.1 | 0 | 0 | 0 |
| 1758166272 | 0 | 0.2 | 0 | 0 | 0 |
| 1758163822 | 11.3 | 0.1 | 51 | 0 | 0 |
| 1758162622 | 12.6 | 0.2 | 44 | 0 | 0 |
| 1758160222 | 10.1 | 0.1 | 44 | 0 | 0 |
| 1758159022 | 11.4 | 0.2 | 41 | 0 | 0 |
| 1758156671 | 0 | 0.1 | 0 | 0 | 0 |
| 1758155471 | 0 | 0.2 | 0 | 0 | 0 |
| 1758153022 | 13.1 | 0.1 | 52 | 4 | 0 |
| 1758151822 | 13 | 0.2 | 51 | 0 | 0 |
| 1758149427 | 12.1 | 0.1 | 51 | 0 | 0 |
| 1758148227 | 12.4 | 0.2 | 51 | 0 | 0 |
| 1758145871 | 0 | 0.1 | 0 | 0 | 0 |
| 1758144671 | 0 | 0.2 | 0 | 0 | 0 |
| 1758142274 | 8.5 | 0.1 | 34 | 1 | 0 |
*Used Equation Coefficients:
Avg 10m: 0, 1, 0
Avg 10m: 0, 1, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)