This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762305567 | 38 Count | 429 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762303583 | 37 Count | 418 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762301600 | 36 Count | 408 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762299619 | 34 Count | 398 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762297636 | 33 Count | 388 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762295648 | 32 Count | 377 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762293665 | 31 Count | 368 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762291684 | 30 Count | 360 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762289701 | 29 Count | 349 Count | 0 Count | 4.55 VDC | 0 VDC |
| 1762287714 | 28 Count | 341 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762285730 | 27 Count | 332 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762283749 | 26 Count | 310 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762281766 | 25 Count | 219 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762279782 | 24 Count | 207 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762277798 | 23 Count | 196 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762275811 | 22 Count | 188 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762273828 | 21 Count | 178 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762271844 | 20 Count | 168 Count | 0 Count | 4.57 VDC | 0 VDC |
| 1762269863 | 18 Count | 146 Count | 0 Count | 4.59 VDC | 0 VDC |
| 1762267880 | 17 Count | 136 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762265896 | 16 Count | 126 Count | 0 Count | 4.6 VDC | 0 VDC |
| 1762263912 | 15 Count | 117 Count | 0 Count | 4.61 VDC | 0 VDC |
| 1762259945 | 13 Count | 95 Count | 0 Count | 4.57 VDC | 0 VDC |
| 1762257961 | 12 Count | 85 Count | 0 Count | 4.56 VDC | 0 VDC |
| 1762255977 | 11 Count | 73 Count | 0 Count | 4.56 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)