This is the latest recevied telemetry packets stored in our database for station/object SV6DBG-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1790661250 | 30.8 C | 31.39 % | 1032.13 hPa | 0 | 0 |
| 1790652220 | 31 C | 30.84 % | 1029.13 hPa | 0 | 0 |
| 1790643190 | 31.1 C | 31.03 % | 1029.63 hPa | 0 | 0 |
| 1790634160 | 31.3 C | 30.05 % | 1028.63 hPa | 0 | 0 |
| 1790625130 | 32.2 C | 28.58 % | 1029.13 hPa | 0 | 0 |
| 1790616100 | 32.3 C | 28.65 % | 1027.13 hPa | 0 | 0 |
| 1790607052 | 25.1 C | 43.06 % | 963.88 hPa | 0 | 0 |
| 1790600451 | 36.9 C | 17.51 % | 1026 hPa | 0 | 0 |
| 1790598485 | 30.7 C | 17.42 % | 1025.38 hPa | 0 | 0 |
| 1790598222 | 30.3 C | 17.5 % | 1017.63 hPa | 0 | 0 |
| 1790593996 | 35.8 C | 23.2 % | 1025.5 hPa | 0 | 0 |
| 1790593814 | 36.3 C | 21.61 % | 1022.38 hPa | 0 | 0 |
| 1790583786 | 33.6 C | 17.43 % | 1026.63 hPa | 0 | 0 |
| 1790583338 | 32.8 C | 21.43 % | 1027.13 hPa | 0 | 0 |
| 1790582969 | 29.5 C | 27.15 % | 1028.38 hPa | 0 | 0 |
| 1790582422 | 27.1 C | 29.92 % | 966.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)