This is the latest recevied telemetry packets stored in our database for station/object E25DQY-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
---|---|---|---|---|---|
1719839799 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 4 % |
1719837977 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 4 % |
1719836155 | 0 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 4 % |
1719834333 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 3 % |
1719832511 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 19 % |
1719830689 | 0 Pkt | 0 Pkt | 0 Pkt | -64 dBm | 32 % |
1719828867 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 42 % |
1719827045 | 0 Pkt | 0 Pkt | 0 Pkt | -62 dBm | 63 % |
1719825223 | 0 Pkt | 1 Pkt | 0 Pkt | -63 dBm | 65 % |
1719823401 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 69 % |
1719821579 | 0 Pkt | 1 Pkt | 0 Pkt | -60 dBm | 70 % |
1719819757 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 69 % |
1719817935 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 70 % |
1719816113 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 71 % |
1719814291 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 72 % |
1719812469 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 71 % |
1719810647 | 0 Pkt | 0 Pkt | 0 Pkt | -59 dBm | 67 % |
1719808825 | 0 Pkt | 1 Pkt | 0 Pkt | -57 dBm | 68 % |
1719807003 | 0 Pkt | 1 Pkt | 0 Pkt | -57 dBm | 68 % |
1719805181 | 0 Pkt | 0 Pkt | 0 Pkt | -61 dBm | 68 % |
1719803313 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 69 % |
1719801484 | 0 Pkt | 0 Pkt | 0 Pkt | -60 dBm | 65 % |
1719799662 | 0 Pkt | 0 Pkt | 0 Pkt | -56 dBm | 64 % |
1719797842 | 0 Pkt | 0 Pkt | 0 Pkt | -58 dBm | 56 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)