APRS Track Direct

My position About ☰

reset

TA3Q-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3Q-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732293631	10 Pkt	53 Pkt	-89 dBm	11.83 V
1732293030	7 Pkt	33 Pkt	-87 dBm	11.83 V
1732292410	8 Pkt	39 Pkt	-85 dBm	11.83 V
1732291800	5 Pkt	31 Pkt	-88 dBm	11.83 V
1732291663	32 Pkt	20 Pkt	-87 dBm	11.83 V
1732289661	9 Pkt	16 Pkt	-87 dBm	11.94 V
1732288168	3 Pkt	33 Pkt	-89 dBm	11.83 V
1732287532	3 Pkt	36 Pkt	-91 dBm	11.94 V
1732286920	5 Pkt	40 Pkt	-87 dBm	11.83 V
1732286310	3 Pkt	24 Pkt	-86 dBm	11.94 V
1732285702	3 Pkt	30 Pkt	-87 dBm	11.83 V
1732285090	7 Pkt	19 Pkt	-83 dBm	11.94 V
1732284480	12 Pkt	51 Pkt	-83 dBm	11.94 V
1732283870	5 Pkt	51 Pkt	-85 dBm	11.83 V
1732283260	7 Pkt	30 Pkt	-86 dBm	11.81 V
1732282650	6 Pkt	49 Pkt	-85 dBm	11.81 V
1732282041	11 Pkt	48 Pkt	-84 dBm	11.81 V
1732281430	6 Pkt	32 Pkt	-86 dBm	11.81 V
1732280820	5 Pkt	55 Pkt	-89 dBm	11.83 V
1732280210	4 Pkt	51 Pkt	-88 dBm	11.92 V
1732279600	1 Pkt	30 Pkt	-83 dBm	11.81 V
1732278989	4 Pkt	61 Pkt	-85 dBm	11.92 V
1732278380	5 Pkt	41 Pkt	-84 dBm	11.81 V
1732277771	6 Pkt	51 Pkt	-87 dBm	11.92 V
1732277160	3 Pkt	61 Pkt	-82 dBm	11.81 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)