APRS Track Direct

My position About ☰

reset

S59DGO-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object S59DGO-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	U2*	U1*	Rx1h*	Eff1h*
1786726549	22 C	13.8 Volt	13.4 Volt	890 Pkt	46 Pcnt
1786726250	22 C	13.8 Volt	13.4 Volt	880 Pkt	46 Pcnt
1786726249	22 C	13.8 Volt	13.4 Volt	880 Pkt	46 Pcnt
1786725949	22 C	13.7 Volt	13.5 Volt	900 Pkt	48 Pcnt
1786725649	22 C	13.8 Volt	13.4 Volt	920 Pkt	48 Pcnt
1786725350	22 C	13.8 Volt	13.4 Volt	930 Pkt	48 Pcnt
1786725349	22 C	13.8 Volt	13.4 Volt	930 Pkt	48 Pcnt
1786725049	22 C	13.8 Volt	13.4 Volt	920 Pkt	48 Pcnt
1786724749	22 C	13.8 Volt	13.4 Volt	920 Pkt	48 Pcnt
1786724450	22 C	13.8 Volt	13.3 Volt	920 Pkt	48 Pcnt
1786724449	22 C	13.8 Volt	13.3 Volt	920 Pkt	48 Pcnt
1786724149	22 C	13.8 Volt	13.4 Volt	920 Pkt	49 Pcnt
1786723849	22 C	13.8 Volt	13.4 Volt	940 Pkt	49 Pcnt
1786723555	22 C	13.8 Volt	13.4 Volt	930 Pkt	49 Pcnt
1786723549	22 C	13.8 Volt	13.4 Volt	930 Pkt	49 Pcnt
1786723249	22 C	13.8 Volt	13.4 Volt	940 Pkt	50 Pcnt
1786722949	22 C	13.8 Volt	13.4 Volt	950 Pkt	50 Pcnt
1786722650	22 C	13.8 Volt	13.4 Volt	950 Pkt	50 Pcnt
1786722649	22 C	13.8 Volt	13.4 Volt	950 Pkt	50 Pcnt
1786722349	22 C	13.8 Volt	13.4 Volt	940 Pkt	50 Pcnt
1786722049	22 C	13.8 Volt	13.4 Volt	920 Pkt	49 Pcnt
1786721750	22 C	13.8 Volt	13.4 Volt	920 Pkt	49 Pcnt
1786721749	22 C	13.8 Volt	13.4 Volt	920 Pkt	49 Pcnt
1786721449	22 C	13.8 Volt	13.5 Volt	920 Pkt	50 Pcnt
1786721149	22 C	13.8 Volt	13.5 Volt	900 Pkt	50 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

U2: 0, 0.1, 0

U1: 0, 0.1, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)