APRS Track Direct

My position About ☰

reset

W0RFP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0RFP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	DC*	Rx1h*	Dg1h*	Eff1h*	Temp*
1790636919	13.95 V	50 Pkt	30 Pkt	100 Pcnt	59 F
1790636619	13.95 V	50 Pkt	30 Pkt	94 Pcnt	59 F
1790636319	13.95 V	50 Pkt	30 Pkt	95 Pcnt	59 F
1790636019	13.95 V	50 Pkt	30 Pkt	94 Pcnt	59 F
1790635719	13.95 V	50 Pkt	30 Pkt	94 Pcnt	59 F
1790635419	13.95 V	50 Pkt	30 Pkt	94 Pcnt	59 F
1790635119	13.95 V	50 Pkt	30 Pkt	93 Pcnt	59 F
1790634819	13.95 V	50 Pkt	30 Pkt	93 Pcnt	59 F
1790634519	13.95 V	60 Pkt	30 Pkt	93 Pcnt	59 F
1790634219	13.95 V	50 Pkt	30 Pkt	93 Pcnt	59 F
1790633919	13.95 V	50 Pkt	30 Pkt	93 Pcnt	59 F
1790633619	13.95 V	60 Pkt	30 Pkt	93 Pcnt	60 F
1790633319	13.88 V	50 Pkt	30 Pkt	93 Pcnt	60 F
1790633019	13.95 V	50 Pkt	30 Pkt	98 Pcnt	60 F
1790632719	13.95 V	60 Pkt	30 Pkt	98 Pcnt	60 F
1790632419	13.95 V	60 Pkt	30 Pkt	98 Pcnt	60 F
1790632119	13.95 V	60 Pkt	30 Pkt	98 Pcnt	60 F
1790631819	13.95 V	60 Pkt	30 Pkt	100 Pcnt	60 F
1790631519	13.95 V	60 Pkt	30 Pkt	100 Pcnt	60 F
1790631219	13.88 V	60 Pkt	30 Pkt	100 Pcnt	60 F
1790630919	13.95 V	60 Pkt	30 Pkt	100 Pcnt	60 F
1790630619	13.95 V	60 Pkt	30 Pkt	100 Pcnt	60 F
1790630319	13.95 V	60 Pkt	30 Pkt	100 Pcnt	60 F
1790630019	13.95 V	50 Pkt	30 Pkt	100 Pcnt	61 F
1790629719	13.95 V	50 Pkt	30 Pkt	100 Pcnt	61 F

*Used Equation Coefficients:

DC: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 1, -100

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)