This is the latest recevied telemetry packets stored in our database for station/object WA2WA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Charge* | Rtime* | Input* | Status* | Load* |
|---|---|---|---|---|---|
| 1836274676 | 97 % | 12141 s | 124 V | 0 | 2 % |
| 1836274526 | 97 % | 11628 s | 124 V | 0 | 2 % |
| 1836274376 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1836274226 | 97 % | 11156 s | 123 V | 0 | 2 % |
| 1836274076 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762330802 | 96 % | 8339 s | 124 V | 0 | 3 % |
| 1762330504 | 97 % | 12141 s | 124 V | 0 | 2 % |
| 1762330203 | 97 % | 12141 s | 124 V | 0 | 2 % |
| 1762329903 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762329302 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762329002 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762328703 | 97 % | 12141 s | 124 V | 0 | 2 % |
| 1762328403 | 97 % | 12141 s | 124 V | 0 | 2 % |
| 1762328103 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762327803 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762327503 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762327203 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762326902 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762326602 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762326302 | 97 % | 11628 s | 123 V | 0 | 2 % |
| 1762326004 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762325703 | 97 % | 12141 s | 124 V | 0 | 2 % |
| 1762325403 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762325102 | 97 % | 12141 s | 123 V | 0 | 2 % |
| 1762324802 | 97 % | 12141 s | 124 V | 0 | 2 % |
*Used Equation Coefficients:
Charge: 0, 1, 0
Rtime: 0, 1, 0
Input: 0, 1, 0
Status: 0, 1, 0
Load: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)