This is the latest recevied telemetry packets stored in our database for station/object K3ORB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792251136 | 496 | 613 | 0 | 0 | 0 |
| 1792251016 | 505 | 612 | 0 | 0 | 0 |
| 1792250897 | 498 | 611 | 0 | 0 | 0 |
| 1792250777 | 497 | 611 | 0 | 0 | 0 |
| 1792250657 | 500 | 611 | 0 | 0 | 0 |
| 1792250538 | 496 | 610 | 0 | 0 | 0 |
| 1792250179 | 497 | 607 | 0 | 0 | 0 |
| 1792250059 | 497 | 607 | 0 | 0 | 0 |
| 1792249940 | 498 | 606 | 0 | 0 | 0 |
| 1792249820 | 495 | 605 | 0 | 0 | 0 |
| 1792249701 | 497 | 604 | 0 | 0 | 0 |
| 1792249581 | 498 | 604 | 0 | 0 | 0 |
| 1792249102 | 495 | 599 | 0 | 0 | 0 |
| 1792183041 | 432 | 637 | 0 | 0 | 0 |
| 1792182442 | 434 | 635 | 0 | 0 | 0 |
| 1792182202 | 435 | 635 | 0 | 0 | 0 |
| 1792181604 | 436 | 633 | 0 | 0 | 0 |
| 1792181484 | 433 | 633 | 0 | 0 | 0 |
| 1792181364 | 477 | 633 | 0 | 0 | 0 |
| 1792181245 | 478 | 633 | 0 | 0 | 0 |
| 1792181125 | 477 | 632 | 0 | 0 | 0 |
| 1792181005 | 477 | 632 | 0 | 0 | 0 |
| 1792180766 | 478 | 631 | 0 | 0 | 0 |
| 1792180646 | 479 | 631 | 0 | 0 | 0 |
| 1792180407 | 479 | 631 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)