APRS Track Direct

My position About ☰

reset

TA6DDX-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA6DDX-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274324	176 Pkt	38 Pkt	13 Pkt	-41 dBm	14.83 V
1762355027	155 Pkt	46 Pkt	15 Pkt	-51 dBm	14.83 V
1762353185	150 Pkt	40 Pkt	12 Pkt	-49 dBm	14.83 V
1762351344	160 Pkt	47 Pkt	16 Pkt	-49 dBm	14.83 V
1762349506	186 Pkt	57 Pkt	22 Pkt	-52 dBm	14.85 V
1762347663	197 Pkt	56 Pkt	17 Pkt	-49 dBm	14.83 V
1762345823	175 Pkt	38 Pkt	14 Pkt	-51 dBm	14.83 V
1762342502	185 Pkt	41 Pkt	20 Pkt	-50 dBm	14.83 V
1762340658	201 Pkt	44 Pkt	31 Pkt	-49 dBm	13.84 V
1762338815	211 Pkt	35 Pkt	27 Pkt	-49 dBm	14.83 V
1762336245	181 Pkt	55 Pkt	23 Pkt	-50 dBm	14.83 V
1762334402	214 Pkt	47 Pkt	24 Pkt	-50 dBm	14.83 V
1762332560	159 Pkt	41 Pkt	27 Pkt	-49 dBm	14.83 V
1762330722	174 Pkt	48 Pkt	24 Pkt	-48 dBm	14.83 V
1762328888	135 Pkt	38 Pkt	23 Pkt	-52 dBm	14.83 V
1762327044	101 Pkt	33 Pkt	37 Pkt	-55 dBm	14.83 V
1762324484	50 Pkt	29 Pkt	30 Pkt	-47 dBm	14.83 V
1762322656	31 Pkt	33 Pkt	39 Pkt	-50 dBm	14.83 V
1762320828	56 Pkt	32 Pkt	31 Pkt	-49 dBm	14.83 V
1762318999	81 Pkt	32 Pkt	32 Pkt	-51 dBm	14.83 V
1762317165	82 Pkt	27 Pkt	17 Pkt	-49 dBm	14.85 V
1762315303	64 Pkt	30 Pkt	32 Pkt	-52 dBm	14.83 V
1762312820	101 Pkt	26 Pkt	38 Pkt	-49 dBm	14.83 V
1762310931	111 Pkt	46 Pkt	37 Pkt	-51 dBm	14.83 V
1762309085	130 Pkt	61 Pkt	22 Pkt	-49 dBm	14.83 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)