APRS Track Direct

My position About ☰

reset

IR3EO-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR3EO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1782530062	12.4 Volt	210 Pkt	140 Pkt	89 Pcnt
1782529762	12.4 Volt	200 Pkt	140 Pkt	89 Pcnt
1782529462	12.48 Volt	200 Pkt	140 Pkt	89 Pcnt
1782529162	12.4 Volt	230 Pkt	140 Pkt	89 Pcnt
1782528861	12.4 Volt	220 Pkt	140 Pkt	89 Pcnt
1782528561	12.4 Volt	250 Pkt	140 Pkt	89 Pcnt
1782528261	12.4 Volt	270 Pkt	140 Pkt	89 Pcnt
1782527960	12.4 Volt	240 Pkt	140 Pkt	89 Pcnt
1782527660	12.4 Volt	230 Pkt	140 Pkt	89 Pcnt
1782527360	12.4 Volt	230 Pkt	140 Pkt	89 Pcnt
1782527060	12.4 Volt	230 Pkt	140 Pkt	89 Pcnt
1782526759	12.4 Volt	230 Pkt	140 Pkt	89 Pcnt
1782526459	12.4 Volt	240 Pkt	130 Pkt	89 Pcnt
1782526159	12.4 Volt	240 Pkt	130 Pkt	89 Pcnt
1782525858	12.4 Volt	250 Pkt	130 Pkt	89 Pcnt
1782525558	12.4 Volt	250 Pkt	130 Pkt	89 Pcnt
1782525258	12.4 Volt	240 Pkt	130 Pkt	89 Pcnt
1782524958	12.4 Volt	240 Pkt	130 Pkt	89 Pcnt
1782524657	12.4 Volt	220 Pkt	130 Pkt	89 Pcnt
1782524357	12.4 Volt	220 Pkt	130 Pkt	89 Pcnt
1782524057	12.4 Volt	220 Pkt	130 Pkt	89 Pcnt
1782523756	12.4 Volt	220 Pkt	130 Pkt	89 Pcnt
1782523456	12.4 Volt	220 Pkt	130 Pkt	89 Pcnt
1782523156	12.4 Volt	220 Pkt	130 Pkt	89 Pcnt
1782522855	12.4 Volt	210 Pkt	130 Pkt	89 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)