APRS Track Direct

My position About ☰

reset

NBSPG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object NBSPG. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1758218920	13.43 Volt	280 Pkt	90 Pkt	78 Pcnt	79.7 Deg F
1758217120	13.8 Volt	300 Pkt	100 Pkt	78 Pcnt	78.8 Deg F
1758215320	13.8 Volt	270 Pkt	90 Pkt	80 Pcnt	78.8 Deg F
1758213520	13.28 Volt	260 Pkt	80 Pkt	80 Pcnt	78.8 Deg F
1758211720	13.8 Volt	280 Pkt	80 Pkt	81 Pcnt	79.7 Deg F
1758209920	13.8 Volt	290 Pkt	80 Pkt	82 Pcnt	80.6 Deg F
1758208120	13.8 Volt	290 Pkt	70 Pkt	81 Pcnt	80.6 Deg F
1758206320	13.8 Volt	300 Pkt	80 Pkt	79 Pcnt	81.5 Deg F
1758204520	13.8 Volt	260 Pkt	90 Pkt	79 Pcnt	82.4 Deg F
1758202720	13.8 Volt	180 Pkt	70 Pkt	80 Pcnt	82.4 Deg F
1758200920	13.8 Volt	180 Pkt	60 Pkt	82 Pcnt	83.3 Deg F
1758199121	13.8 Volt	220 Pkt	80 Pkt	85 Pcnt	84.2 Deg F
1758197320	13.8 Volt	210 Pkt	80 Pkt	86 Pcnt	84.2 Deg F
1758195520	13.8 Volt	200 Pkt	70 Pkt	86 Pcnt	84.2 Deg F
1758193720	13.8 Volt	200 Pkt	70 Pkt	87 Pcnt	84.2 Deg F
1758191920	13.8 Volt	220 Pkt	70 Pkt	88 Pcnt	85.1 Deg F
1758190121	13.8 Volt	220 Pkt	80 Pkt	88 Pcnt	85.1 Deg F
1758188321	13.8 Volt	210 Pkt	80 Pkt	88 Pcnt	85.1 Deg F
1758186521	13.73 Volt	210 Pkt	70 Pkt	89 Pcnt	86 Deg F
1758184721	13.8 Volt	220 Pkt	80 Pkt	88 Pcnt	86 Deg F
1758182921	13.73 Volt	220 Pkt	80 Pkt	87 Pcnt	86 Deg F
1758181121	13.8 Volt	210 Pkt	70 Pkt	87 Pcnt	86 Deg F
1758179321	13.73 Volt	190 Pkt	70 Pkt	87 Pcnt	86.9 Deg F
1758177521	13.8 Volt	190 Pkt	60 Pkt	84 Pcnt	86.9 Deg F
1758175721	13.73 Volt	190 Pkt	70 Pkt	82 Pcnt	86.9 Deg F

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)