This is the latest recevied telemetry packets stored in our database for station/object LW2DQC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778035608 | 240 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778033804 | 239 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778032001 | 238 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778030197 | 237 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778028394 | 236 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778026633 | 235 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778024829 | 234 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778023026 | 233 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778021222 | 232 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778019419 | 231 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778017615 | 230 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778015812 | 229 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778014008 | 228 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778012204 | 227 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778010400 | 226 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778008597 | 225 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778006794 | 224 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778005035 | 223 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778003231 | 222 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1778001428 | 221 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1777999624 | 220 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1777997821 | 219 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1777996017 | 218 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1777994213 | 217 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1777992409 | 216 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)