APRS Track Direct

My position About ☰

reset

LZ0DAV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0DAV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	EffTo*	Eff1h*
1732522717	13.73 Volt	320 Pkt	79 Pcnt	92 Pcnt
1732522120	13.73 Volt	310 Pkt	79 Pcnt	92 Pcnt
1732522117	13.73 Volt	310 Pkt	79 Pcnt	92 Pcnt
1732521517	13.73 Volt	320 Pkt	79 Pcnt	90 Pcnt
1732520917	13.73 Volt	320 Pkt	79 Pcnt	92 Pcnt
1732520326	13.73 Volt	310 Pkt	79 Pcnt	91 Pcnt
1732520317	13.73 Volt	310 Pkt	79 Pcnt	91 Pcnt
1732519717	13.73 Volt	320 Pkt	79 Pcnt	91 Pcnt
1732519117	13.73 Volt	310 Pkt	79 Pcnt	90 Pcnt
1732518523	13.73 Volt	300 Pkt	79 Pcnt	91 Pcnt
1732518517	13.73 Volt	300 Pkt	79 Pcnt	91 Pcnt
1732517917	13.73 Volt	320 Pkt	79 Pcnt	92 Pcnt
1732517317	13.73 Volt	320 Pkt	79 Pcnt	91 Pcnt
1732516726	13.73 Volt	310 Pkt	79 Pcnt	93 Pcnt
1732516717	13.73 Volt	310 Pkt	79 Pcnt	93 Pcnt
1732516117	13.73 Volt	290 Pkt	79 Pcnt	93 Pcnt
1732515517	13.73 Volt	310 Pkt	79 Pcnt	93 Pcnt
1732514919	13.73 Volt	320 Pkt	79 Pcnt	93 Pcnt
1732514917	13.73 Volt	320 Pkt	79 Pcnt	93 Pcnt
1732514317	13.73 Volt	310 Pkt	79 Pcnt	93 Pcnt
1732513717	13.73 Volt	320 Pkt	79 Pcnt	92 Pcnt
1732513123	13.73 Volt	320 Pkt	79 Pcnt	90 Pcnt
1732513117	13.73 Volt	320 Pkt	79 Pcnt	90 Pcnt
1732512517	13.73 Volt	320 Pkt	79 Pcnt	91 Pcnt
1732511917	13.73 Volt	320 Pkt	79 Pcnt	91 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)