This is the latest recevied telemetry packets stored in our database for station/object XE2XEH-D. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274677 | 515 | 170 | 122 | 0 | 0 |
| 1782507579 | 537 | 24 | 87 | 99 | 0 |
| 1782506979 | 542 | 15 | 84 | 96 | 0 |
| 1782506379 | 542 | 24 | 87 | 102 | 0 |
| 1782505779 | 537 | 24 | 87 | 102 | 0 |
| 1782505179 | 542 | 15 | 87 | 96 | 0 |
| 1782503979 | 537 | 20 | 84 | 96 | 0 |
| 1782503378 | 537 | 15 | 87 | 94 | 0 |
| 1782502778 | 537 | 19 | 84 | 96 | 0 |
| 1782502178 | 537 | 20 | 84 | 91 | 0 |
| 1782501578 | 537 | 15 | 84 | 94 | 0 |
| 1782500378 | 542 | 20 | 84 | 94 | 0 |
| 1782499778 | 537 | 20 | 84 | 96 | 0 |
| 1782499178 | 537 | 20 | 84 | 96 | 0 |
| 1782498578 | 537 | 24 | 84 | 99 | 0 |
| 1782497978 | 537 | 20 | 87 | 99 | 0 |
| 1782497379 | 537 | 19 | 84 | 96 | 0 |
| 1782496778 | 537 | 15 | 82 | 99 | 0 |
| 1782496178 | 532 | 24 | 84 | 96 | 0 |
| 1782495578 | 537 | 24 | 84 | 94 | 0 |
| 1782494978 | 537 | 15 | 82 | 99 | 0 |
| 1782494378 | 537 | 19 | 84 | 96 | 0 |
| 1782493777 | 548 | 23 | 138 | 99 | 0 |
| 1782493177 | 537 | 15 | 138 | 107 | 0 |
| 1782492577 | 526 | 20 | 138 | 99 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)