This is the latest recevied telemetry packets stored in our database for station/object DL5DAE-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754142181 | 20.5 deg C | 66.6 % | 1014 hPa | 0 | 0 |
| 1754141852 | 20.4 deg C | 66.8 % | 1014 hPa | 0 | 0 |
| 1754140952 | 20.3 deg C | 67 % | 1013.9 hPa | 0 | 0 |
| 1754140051 | 20.2 deg C | 66.7 % | 1014 hPa | 0 | 0 |
| 1754139151 | 20.1 deg C | 67 % | 1014 hPa | 0 | 0 |
| 1754138251 | 20 deg C | 67.7 % | 1013.8 hPa | 0 | 0 |
| 1754137351 | 20 deg C | 68 % | 1013.7 hPa | 0 | 0 |
| 1754136451 | 19.9 deg C | 67.9 % | 1015.1 hPa | 0 | 0 |
| 1754135551 | 19.8 deg C | 68.5 % | 1015 hPa | 0 | 0 |
| 1754134651 | 19.8 deg C | 69.3 % | 1015 hPa | 0 | 0 |
| 1754133751 | 19.7 deg C | 69.4 % | 1014.9 hPa | 0 | 0 |
| 1754132851 | 19.6 deg C | 69.5 % | 1014.7 hPa | 0 | 0 |
| 1754131951 | 19.6 deg C | 70.1 % | 1014.6 hPa | 0 | 0 |
| 1754131051 | 19.5 deg C | 69.8 % | 1014.6 hPa | 0 | 0 |
| 1754130151 | 19.5 deg C | 70 % | 1014.4 hPa | 0 | 0 |
| 1754129817 | 19.5 deg C | 70 % | 1014.5 hPa | 0 | 0 |
| 1754128917 | 19.4 deg C | 70.2 % | 1014.4 hPa | 0 | 0 |
| 1754128017 | 19.3 deg C | 69.9 % | 1014.5 hPa | 0 | 0 |
| 1754127117 | 19.3 deg C | 69.6 % | 1014.4 hPa | 0 | 0 |
| 1754126217 | 19.2 deg C | 69.3 % | 1014.3 hPa | 0 | 0 |
| 1754125317 | 19.1 deg C | 69.4 % | 1013.6 hPa | 0 | 0 |
| 1754124417 | 19 deg C | 69.9 % | 1013.5 hPa | 0 | 0 |
| 1754123517 | 19 deg C | 69.4 % | 1013.4 hPa | 0 | 0 |
| 1754122617 | 19 deg C | 69.4 % | 1013.3 hPa | 0 | 0 |
| 1754121716 | 19 deg C | 69.4 % | 1013.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)