This is the latest recevied telemetry packets stored in our database for station/object VA3XLT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Dg10m* | Rx1h* | Dg10m* | Eff1h* | Temp* |
|---|---|---|---|---|---|
| 1778030929 | 5 Pkt | 80 Pkt | 5 Pkt | 59 Pcnt | 62.6 F |
| 1778030088 | 2 Pkt | 80 Pkt | 2 Pkt | 59 Pcnt | 62.6 F |
| 1778029247 | 1 Pkt | 80 Pkt | 1 Pkt | 61 Pcnt | 62.6 F |
| 1778028406 | 1 Pkt | 80 Pkt | 1 Pkt | 62 Pcnt | 62.6 F |
| 1778027566 | 6 Pkt | 70 Pkt | 6 Pkt | 61 Pcnt | 62.6 F |
| 1778026725 | 2 Pkt | 70 Pkt | 2 Pkt | 63 Pcnt | 62.6 F |
| 1778025884 | 1 Pkt | 70 Pkt | 1 Pkt | 63 Pcnt | 62.6 F |
| 1778025043 | 2 Pkt | 80 Pkt | 2 Pkt | 65 Pcnt | 62.6 F |
| 1778024202 | 5 Pkt | 80 Pkt | 5 Pkt | 65 Pcnt | 63.5 F |
| 1778023362 | 1 Pkt | 90 Pkt | 1 Pkt | 62 Pcnt | 62.6 F |
| 1778022522 | 3 Pkt | 100 Pkt | 3 Pkt | 61 Pcnt | 62.6 F |
| 1778021680 | 1 Pkt | 90 Pkt | 1 Pkt | 61 Pcnt | 63.5 F |
| 1778020839 | 1 Pkt | 90 Pkt | 1 Pkt | 60 Pcnt | 63.5 F |
| 1778019998 | 2 Pkt | 80 Pkt | 2 Pkt | 57 Pcnt | 63.5 F |
| 1778019158 | 2 Pkt | 80 Pkt | 2 Pkt | 59 Pcnt | 63.5 F |
| 1778018317 | 2 Pkt | 80 Pkt | 2 Pkt | 56 Pcnt | 62.6 F |
| 1778017476 | 0 Pkt | 80 Pkt | 0 Pkt | 56 Pcnt | 63.5 F |
| 1778016635 | 5 Pkt | 90 Pkt | 5 Pkt | 58 Pcnt | 62.6 F |
| 1778015794 | 1 Pkt | 90 Pkt | 1 Pkt | 59 Pcnt | 62.6 F |
| 1778014954 | 1 Pkt | 100 Pkt | 1 Pkt | 64 Pcnt | 62.6 F |
| 1778014113 | 1 Pkt | 90 Pkt | 1 Pkt | 60 Pcnt | 62.6 F |
| 1778013272 | 2 Pkt | 80 Pkt | 2 Pkt | 56 Pcnt | 62.6 F |
| 1778012431 | 1 Pkt | 80 Pkt | 1 Pkt | 58 Pcnt | 62.6 F |
| 1778011590 | 1 Pkt | 70 Pkt | 1 Pkt | 55 Pcnt | 62.6 F |
| 1778010750 | 2 Pkt | 60 Pkt | 2 Pkt | 51 Pcnt | 62.6 F |
*Used Equation Coefficients:
Dg10m: 0, 1, 0
Rx1h: 0, 10, 0
Dg10m: 0, 1, 0
Eff1h: 0, 1, 0
Temp: 0, 0.9, -83.2
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)