This is the latest recevied telemetry packets stored in our database for station/object HS8AC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792260934 | 27.03 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792260334 | 27.11 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792259734 | 27.05 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792259134 | 27.15 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792258534 | 27.17 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792257934 | 27.73 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792257334 | 28 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792256733 | 28.15 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792256134 | 28.24 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792255534 | 28.03 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792254934 | 27.92 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792254334 | 27.94 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792253733 | 27.82 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792253134 | 27.79 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792252533 | 27.71 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792251934 | 27.75 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792251333 | 27.81 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792250733 | 27.8 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792250133 | 27.83 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792249533 | 27.8 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792248933 | 27.93 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792248333 | 27.72 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792247733 | 28.17 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792247133 | 28.22 °C | 100 %RH | 4.2 V | 0 | 0 |
| 1792246533 | 28.17 °C | 100 %RH | 4.2 V | 0 | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)