APRS Track Direct

My position About ☰

reset

E24SAT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24SAT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732277257	0 Pkt	0 Pkt	-39 dBm	0.82 V
1732276333	0 Pkt	0 Pkt	-39 dBm	0.68 V
1732275409	0 Pkt	0 Pkt	-39 dBm	0.82 V
1732274485	0 Pkt	0 Pkt	-39 dBm	0.78 V
1732273560	0 Pkt	0 Pkt	-39 dBm	0.84 V
1732272636	0 Pkt	0 Pkt	-38 dBm	0.78 V
1732271712	0 Pkt	1 Pkt	-38 dBm	0.78 V
1732270787	1 Pkt	0 Pkt	-38 dBm	0.82 V
1732269863	0 Pkt	0 Pkt	-38 dBm	0.8 V
1732268939	0 Pkt	0 Pkt	-39 dBm	0.82 V
1732268014	3 Pkt	1 Pkt	-39 dBm	0.76 V
1732267090	0 Pkt	1 Pkt	-38 dBm	0.78 V
1732266166	0 Pkt	0 Pkt	-37 dBm	0.76 V
1732265242	2 Pkt	4 Pkt	-38 dBm	0.76 V
1732264317	0 Pkt	0 Pkt	-39 dBm	0.74 V
1732263393	0 Pkt	0 Pkt	-38 dBm	0.8 V
1732262469	2 Pkt	0 Pkt	-38 dBm	0.74 V
1732261544	0 Pkt	0 Pkt	-38 dBm	0.76 V
1732260619	0 Pkt	2 Pkt	-37 dBm	0.76 V
1732259695	2 Pkt	0 Pkt	-38 dBm	0.76 V
1732258770	0 Pkt	0 Pkt	-37 dBm	0.76 V
1732257847	0 Pkt	0 Pkt	-38 dBm	0.82 V
1732256923	1 Pkt	0 Pkt	-37 dBm	0.62 V
1732255999	0 Pkt	1 Pkt	-38 dBm	0.78 V
1732255075	5 Pkt	3 Pkt	-38 dBm	0.76 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)