This is the latest recevied telemetry packets stored in our database for station/object CR7BYS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | CPU* | RAM* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779764649 | 48 degC | 0.6 % | 74 % | 0 | 0 |
| 1779763749 | 48 degC | 0.7 % | 74 % | 0 | 0 |
| 1779761048 | 49 degC | 0.6 % | 74 % | 0 | 0 |
| 1779760148 | 49 degC | 0.7 % | 74 % | 0 | 0 |
| 1779759248 | 49 degC | 0.5 % | 75 % | 0 | 0 |
| 1779758348 | 48 degC | 0.7 % | 75 % | 0 | 0 |
| 1779757448 | 48 degC | 0.5 % | 74 % | 0 | 0 |
| 1779756548 | 48 degC | 0.7 % | 74 % | 0 | 0 |
| 1779755648 | 48 degC | 0.7 % | 74 % | 0 | 0 |
| 1779754748 | 48 degC | 0.9 % | 74 % | 0 | 0 |
| 1779753848 | 47 degC | 0.6 % | 74 % | 0 | 0 |
| 1779752948 | 49 degC | 0.7 % | 74 % | 0 | 0 |
| 1779752048 | 48 degC | 0.7 % | 73 % | 0 | 0 |
| 1779751148 | 49 degC | 0.7 % | 73 % | 0 | 0 |
| 1779750248 | 49 degC | 0.8 % | 73 % | 0 | 0 |
| 1779749348 | 49 degC | 0.9 % | 73 % | 0 | 0 |
| 1779748448 | 48 degC | 0.7 % | 73 % | 0 | 0 |
| 1779747548 | 48 degC | 0.7 % | 73 % | 0 | 0 |
| 1779746648 | 48 degC | 0.6 % | 73 % | 0 | 0 |
| 1779745748 | 49 degC | 0.8 % | 74 % | 0 | 0 |
| 1779744848 | 49 degC | 0.6 % | 74 % | 0 | 0 |
| 1779743948 | 49 degC | 0.5 % | 74 % | 0 | 0 |
| 1779743048 | 50 degC | 0.5 % | 73 % | 0 | 0 |
| 1779742148 | 49 degC | 0.6 % | 73 % | 0 | 0 |
| 1779741248 | 49 degC | 0.5 % | 73 % | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
CPU: 0, 0.1, 0
RAM: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)