This is the latest recevied telemetry packets stored in our database for station/object W6PKT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754184262 | 12.1 | 13.8 | 67 | 40 | 108 |
| 1754179162 | 12.1 | 18 | 83 | 47 | 107 |
| 1754176611 | 12.1 | 18.3 | 85 | 47 | 107 |
| 1754174061 | 12.1 | 18.5 | 85 | 48 | 107 |
| 1754171511 | 12.5 | 14.3 | 70 | 41 | 107 |
| 1754168964 | 12.2 | 18.8 | 87 | 48 | 107 |
| 1754166411 | 12.3 | 14.3 | 69 | 41 | 107 |
| 1754163861 | 12.1 | 18.8 | 87 | 48 | 107 |
| 1754161310 | 12.2 | 18.7 | 86 | 48 | 107 |
| 1754158761 | 13 | 14.9 | 72 | 42 | 107 |
| 1754156210 | 12.7 | 14.6 | 70 | 41 | 107 |
| 1754153661 | 12.6 | 14.4 | 69 | 41 | 107 |
| 1754151110 | 12.5 | 14.3 | 70 | 41 | 107 |
| 1754148559 | 11.8 | 13.9 | 68 | 40 | 107 |
| 1754146010 | 12 | 13.8 | 67 | 40 | 107 |
| 1754143460 | 11.9 | 13.6 | 66 | 39 | 107 |
| 1754140913 | 11.9 | 13.5 | 66 | 39 | 107 |
| 1754138359 | 11.9 | 0.1 | 10 | 15 | 104 |
| 1754135810 | 11.9 | 0 | 10 | 15 | 104 |
| 1754133259 | 11.9 | 0 | 10 | 15 | 104 |
| 1754130709 | 11.9 | 0 | 10 | 15 | 104 |
| 1754128158 | 11.9 | 0.1 | 10 | 15 | 104 |
| 1754125608 | 11.9 | 0.1 | 10 | 15 | 105 |
| 1754123058 | 11.9 | 0.1 | 10 | 15 | 104 |
| 1754120508 | 12 | 0 | 10 | 15 | 104 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)