This is the latest recevied telemetry packets stored in our database for station/object VE2CLT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | 24-12* | Batt* | Temp* | Intrusion* | Hydro* |
|---|---|---|---|---|---|
| 1778062114 | 0.06 V | 0 V | 25.48 degC | 17 0/1 | 73 0/1 |
| 1778062064 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778062014 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061964 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061914 | 0.06 V | 0 V | 25.48 degC | 22 0/1 | 73 0/1 |
| 1778061866 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061813 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061764 | 0.06 V | 0 V | 25.48 degC | 17 0/1 | 73 0/1 |
| 1778061714 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 73 0/1 |
| 1778061666 | 0.06 V | 0 V | 25.48 degC | 17 0/1 | 73 0/1 |
| 1778061613 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061514 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 73 0/1 |
| 1778061413 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061313 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061264 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778061214 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 73 0/1 |
| 1778061114 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778060914 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 70 0/1 |
| 1778060813 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 72 0/1 |
| 1778060764 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 73 0/1 |
| 1778060714 | 0.06 V | 0 V | 25.48 degC | 17 0/1 | 72 0/1 |
| 1778060663 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 73 0/1 |
| 1778060614 | 0.06 V | 0 V | 25.48 degC | 17 0/1 | 73 0/1 |
| 1778060563 | 0.06 V | 0 V | 25.48 degC | 21 0/1 | 72 0/1 |
| 1778060514 | 0.06 V | 0 V | 25.48 degC | 18 0/1 | 72 0/1 |
*Used Equation Coefficients:
24-12: 0, 0.0582, 0
Batt: 0, 0.1176, 0
Temp: 0, 1.96, 0
Intrusion: 0, 1, 0
Hydro: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)