This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1751274166 | 6 | 1 | 39 | 34 | 1003 |
| 1751274038 | 7 | 1 | 39 | 34 | 1003 |
| 1751273974 | 7 | 1 | 39 | 34 | 1003 |
| 1751273845 | 5 | 1 | 39 | 34 | 1003 |
| 1751273769 | 6 | 1 | 39 | 34 | 1003 |
| 1751273508 | 6 | 1 | 39 | 34 | 1003 |
| 1751273379 | 7 | 1 | 39 | 34 | 1003 |
| 1751273315 | 6 | 1 | 39 | 34 | 1003 |
| 1751273058 | 7 | 1 | 39 | 34 | 1003 |
| 1751272990 | 7 | 1 | 39 | 34 | 1003 |
| 1751272861 | 7 | 1 | 39 | 34 | 1003 |
| 1751272540 | 6 | 1 | 39 | 34 | 1003 |
| 1751272411 | 5 | 2 | 39 | 34 | 1003 |
| 1751272330 | 6 | 1 | 39 | 34 | 1003 |
| 1751272265 | 6 | 1 | 39 | 34 | 1003 |
| 1751272137 | 5 | 1 | 39 | 34 | 1003 |
| 1751271938 | 4 | 3 | 39 | 34 | 1003 |
| 1751271810 | 5 | 1 | 39 | 34 | 1003 |
| 1751271287 | 5 | 1 | 40 | 34 | 1003 |
| 1751271177 | 5 | 1 | 40 | 34 | 1003 |
| 1751271113 | 5 | 1 | 40 | 34 | 1003 |
| 1751271049 | 3 | 2 | 40 | 33 | 1003 |
| 1751270723 | 5 | 1 | 40 | 33 | 1003 |
| 1751270595 | 6 | 1 | 40 | 33 | 1003 |
| 1751269752 | 5 | 1 | 40 | 32 | 1003 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)