This is the latest recevied telemetry packets stored in our database for station/object DF1IAN-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1778007547 | 20.2 C | 1032.63 hPa | 0 | 0 | 0 |
| 1778006344 | 20.8 C | 1033.63 hPa | 0 | 0 | 0 |
| 1778004975 | 21.5 C | 1018.13 hPa | 0 | 0 | 0 |
| 1778000748 | 23.4 C | 986 hPa | 0 | 0 | 0 |
| 1777997671 | 23.3 C | 1017 hPa | 0 | 0 | 0 |
| 1777997394 | 23.4 C | 1022 hPa | 0 | 0 | 0 |
| 1777997109 | 22.8 C | 1017.5 hPa | 0 | 0 | 0 |
| 1777959561 | 19 C | 1014.5 hPa | 0 | 0 | 0 |
| 1777959041 | 18.4 C | 1011.5 hPa | 0 | 0 | 0 |
| 1777957195 | 16.2 C | 1012.13 hPa | 0 | 0 | 0 |
| 1777957010 | 15.7 C | 1007.25 hPa | 0 | 0 | 0 |
| 1777956834 | 15.4 C | 1011.25 hPa | 0 | 0 | 0 |
| 1777956512 | 14.4 C | 1013.63 hPa | 0 | 0 | 0 |
| 1777956290 | 14.8 C | 1015.13 hPa | 0 | 0 | 0 |
| 1777952910 | 15.4 C | 996 hPa | 0 | 0 | 0 |
| 1777948016 | 16.2 C | 0 hPa | 0 | 0 | 0 |
| 1777943158 | 17.3 C | 1018.75 hPa | 0 | 0 | 0 |
| 1777937972 | 18.9 C | 1018.63 hPa | 0 | 0 | 0 |
| 1777929366 | 21.5 C | 1000.13 hPa | 0 | 0 | 0 |
| 1777927913 | 21.9 C | 969.63 hPa | 0 | 0 | 0 |
| 1777926267 | 22.5 C | 1029 hPa | 0 | 0 | 0 |
| 1777924291 | 23.2 C | 1013.63 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)