This is the latest recevied telemetry packets stored in our database for station/object CE3TDM-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791723398 | 3.72 VDC | 22.8 C | 53.15 % | 1021.13 hPa | 0 |
| 1791723374 | 3.72 VDC | 22.8 C | 53.15 % | 1021.25 hPa | 0 |
| 1791723245 | 3.72 VDC | 22.4 C | 54.62 % | 1019.88 hPa | 0 |
| 1791723173 | 3.72 VDC | 22.3 C | 55.09 % | 1020.13 hPa | 0 |
| 1791722913 | 3.72 VDC | 21.1 C | 60.96 % | 1023.75 hPa | 0 |
| 1791722890 | 3.73 VDC | 21.1 C | 60.96 % | 1025.25 hPa | 0 |
| 1791722365 | 3.73 VDC | 18.3 C | 65.01 % | 1027.25 hPa | 0 |
| 1791722319 | 3.73 VDC | 18.3 C | 65.19 % | 1028.38 hPa | 0 |
| 1791722278 | 3.73 VDC | 18.3 C | 65.19 % | 1026.5 hPa | 0 |
| 1791722236 | 3.73 VDC | 18.2 C | 65.6 % | 1026.75 hPa | 0 |
| 1791722191 | 3.73 VDC | 18 C | 64.99 % | 1023.88 hPa | 0 |
| 1791722124 | 3.73 VDC | 18 C | 64.91 % | 1025.88 hPa | 0 |
| 1791721971 | 3.73 VDC | 17.8 C | 64.79 % | 1026 hPa | 0 |
| 1791721877 | 3.74 VDC | 17.6 C | 64.96 % | 1025.5 hPa | 0 |
| 1791721834 | 3.74 VDC | 17.6 C | 64.53 % | 1026.13 hPa | 0 |
| 1791721795 | 3.74 VDC | 17.6 C | 64.53 % | 1026.63 hPa | 0 |
| 1791721755 | 3.73 VDC | 17.5 C | 64.32 % | 1025.25 hPa | 0 |
| 1791721724 | 3.74 VDC | 17.5 C | 64.32 % | 1027 hPa | 0 |
| 1791721689 | 3.74 VDC | 17.5 C | 64.24 % | 1027 hPa | 0 |
| 1791721660 | 3.74 VDC | 17.5 C | 64.24 % | 1028.13 hPa | 0 |
| 1791721635 | 3.74 VDC | 17.5 C | 64.69 % | 1027.13 hPa | 0 |
| 1791721611 | 3.74 VDC | 17.5 C | 64.69 % | 1028.88 hPa | 0 |
| 1791721547 | 3.74 VDC | 17.4 C | 64.58 % | 1027.88 hPa | 0 |
| 1791721510 | 3.74 VDC | 17.3 C | 64.63 % | 1027.13 hPa | 0 |
| 1791721473 | 3.74 VDC | 17.2 C | 64.22 % | 1027 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Value2: 0, 0.1, -50
Value3: 0, 0.01, 0
Value4: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)