This is the latest recevied telemetry packets stored in our database for station/object VK4ARD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794911697 | 124 | 47 | 0 | 0 | 0 |
| 1794910977 | 124 | 45 | 0 | 0 | 0 |
| 1794909536 | 124 | 47 | 0 | 0 | 0 |
| 1794907375 | 124 | 45 | 0 | 0 | 0 |
| 1794905216 | 124 | 46 | 0 | 0 | 0 |
| 1794904494 | 124 | 47 | 0 | 0 | 0 |
| 1794901615 | 126 | 45 | 0 | 0 | 0 |
| 1794900892 | 128 | 46 | 0 | 0 | 0 |
| 1794900171 | 130 | 46 | 0 | 0 | 0 |
| 1794899451 | 131 | 46 | 0 | 0 | 0 |
| 1794898012 | 128 | 45 | 0 | 0 | 0 |
| 1794893688 | 131 | 46 | 0 | 0 | 0 |
| 1794892969 | 134 | 46 | 0 | 0 | 0 |
| 1794890808 | 136 | 46 | 0 | 0 | 0 |
| 1794889368 | 137 | 46 | 0 | 0 | 0 |
| 1794888647 | 132 | 45 | 0 | 0 | 0 |
| 1794887928 | 129 | 46 | 0 | 0 | 0 |
| 1794886486 | 128 | 46 | 0 | 0 | 0 |
| 1794885766 | 132 | 46 | 0 | 0 | 0 |
| 1794885046 | 130 | 45 | 0 | 0 | 0 |
| 1794883605 | 128 | 47 | 0 | 0 | 0 |
| 1794882885 | 129 | 47 | 0 | 0 | 0 |
| 1794882165 | 128 | 47 | 0 | 0 | 0 |
| 1794881444 | 128 | 47 | 0 | 0 | 0 |
| 1794880724 | 128 | 46 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)