This is the latest recevied telemetry packets stored in our database for station/object DK8HC-WX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | WIFI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1779784537 | 94 % | 0 V | 0 | 0 | 0 |
| 1779783937 | 90 % | 0 V | 0 | 0 | 0 |
| 1779783338 | 90 % | 0 V | 0 | 0 | 0 |
| 1779782737 | 96 % | 0 V | 0 | 0 | 0 |
| 1779782137 | 92 % | 0 V | 0 | 0 | 0 |
| 1779781537 | 86 % | 0 V | 0 | 0 | 0 |
| 1779780937 | 98 % | 0 V | 0 | 0 | 0 |
| 1779780337 | 98 % | 0 V | 0 | 0 | 0 |
| 1779779737 | 96 % | 0 V | 0 | 0 | 0 |
| 1779779137 | 92 % | 0 V | 0 | 0 | 0 |
| 1779778544 | 96 % | 0 V | 0 | 0 | 0 |
| 1779777937 | 98 % | 0 V | 0 | 0 | 0 |
| 1779777337 | 94 % | 0 V | 0 | 0 | 0 |
| 1779776737 | 98 % | 0 V | 0 | 0 | 0 |
| 1779776137 | 92 % | 0 V | 0 | 0 | 0 |
| 1779775537 | 94 % | 0 V | 0 | 0 | 0 |
| 1779774937 | 92 % | 0 V | 0 | 0 | 0 |
| 1779774337 | 94 % | 0 V | 0 | 0 | 0 |
| 1779773737 | 94 % | 0 V | 0 | 0 | 0 |
| 1779773137 | 92 % | 0 V | 0 | 0 | 0 |
| 1779772537 | 98 % | 0 V | 0 | 0 | 0 |
| 1779771937 | 98 % | 0 V | 0 | 0 | 0 |
| 1779771337 | 96 % | 0 V | 0 | 0 | 0 |
| 1779770737 | 90 % | 0 V | 0 | 0 | 0 |
| 1779770137 | 98 % | 0 V | 0 | 0 | 0 |
*Used Equation Coefficients:
WIFI: 0, 1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)