This is the latest recevied telemetry packets stored in our database for station/object SA5VCC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBat* | Bat* | CpuTemp* | CpuHum* | Lux* |
|---|---|---|---|---|---|
| 1779794201 | 4.33 V | 17.5 C | 35.8 C | 53.5 % | 0 lx |
| 1779792929 | 4.33 V | 17.1 C | 30.2 C | 58.4 % | 0 lx |
| 1779790385 | 4.33 V | 20.1 C | 30.8 C | 61.6 % | 0 lx |
| 1779789112 | 4.33 V | 19.6 C | 35.9 C | 59 % | 0 lx |
| 1779787840 | 4.33 V | 20.8 C | 33.6 C | 67.5 % | 0 lx |
| 1779786568 | 4.33 V | 21 C | 33.3 C | 64.9 % | 0 lx |
| 1779785296 | 4.33 V | 19.7 C | 40.9 C | 60.6 % | 0 lx |
| 1779784024 | 4.33 V | 19.6 C | 37.2 C | 63.4 % | 0 lx |
| 1779782752 | 4.33 V | 18.3 C | 34.9 C | 63.2 % | 0 lx |
| 1779781480 | 4.33 V | 16.4 C | 41 C | 60.3 % | 0 lx |
| 1779780208 | 4.33 V | 15.6 C | 32.5 C | 66 % | 0 lx |
| 1779778936 | 4.33 V | 15.1 C | 26.9 C | 69.7 % | 0 lx |
| 1779777663 | 4.33 V | 13.8 C | 30.4 C | 65 % | 0 lx |
| 1779776395 | 4.33 V | 12.1 C | 39 C | 57.5 % | 0 lx |
| 1779773846 | 4.33 V | 9.5 C | 38 C | 56.1 % | 0 lx |
| 1779772574 | 4.33 V | 8.3 C | 34.7 C | 58.8 % | 0 lx |
| 1779771302 | 4.39 V | 7.4 C | 31.3 C | 58.4 % | 0 lx |
| 1779770030 | 4.4 V | 6.3 C | 32.2 C | 59.1 % | 0 lx |
| 1779768758 | 4.39 V | 5.8 C | 25.8 C | 64.2 % | 0 lx |
| 1779766214 | 4.33 V | 4.9 C | 11.5 C | 82.3 % | 0 lx |
| 1779764942 | 4.31 V | 4.7 C | 11.4 C | 82.5 % | 0 lx |
| 1779763670 | 4.31 V | 4.7 C | 6.7 C | 85 % | 0 lx |
| 1779762398 | 4.31 V | 4.8 C | 5.9 C | 85.4 % | 0 lx |
| 1779761126 | 4.31 V | 5 C | 5.4 C | 85.5 % | 0 lx |
| 1779759854 | 4.31 V | 5.3 C | 5.3 C | 85.5 % | 0 lx |
*Used Equation Coefficients:
VBat: 0, 0.01, 2.5
Bat: 0, 0.1, 0
CpuTemp: 0, 0.1, 0
CpuHum: 0, 0.1, 0
Lux: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)