APRS Track Direct

My position About ☰

reset

KC2G Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC2G. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	BatTemp*	Bat*	ChgA*	Solar*	Chg*
1779756336	67.5 deg.F	13.3 V	0 A	10 V	13.73 Ah
1779755436	70 deg.F	13.3 V	0 A	13.15 V	13.73 Ah
1779755190	70 deg.F	13.35 V	0 A	17.8 V	13.73 Ah
1779754536	70 deg.F	13.3 V	0 A	13.3 V	13.73 Ah
1779753636	70 deg.F	13.35 V	0 A	17.8 V	13.73 Ah
1779751836	70 deg.F	13.35 V	0.2 A	17.25 V	13.73 Ah
1779749138	72 deg.F	13.35 V	0.3 A	19.55 V	12.75 Ah
1779748238	72 deg.F	13.35 V	0.4 A	16.9 V	12.75 Ah
1779746439	72 deg.F	13.4 V	0.6 A	16.95 V	12.75 Ah
1779745538	72 deg.F	13.4 V	0.6 A	20.1 V	12.75 Ah
1779744636	72 deg.F	13.4 V	0.7 A	18.1 V	12.12 Ah
1779743739	72 deg.F	13.4 V	1 A	19 V	12.12 Ah
1779742836	72 deg.F	13.4 V	0.6 A	18.1 V	12.12 Ah
1779741036	74.5 deg.F	13.4 V	0.9 A	19.05 V	11.5 Ah
1779740139	74.5 deg.F	13.4 V	0.6 A	16.55 V	11.5 Ah
1779739238	74.5 deg.F	13.4 V	1.3 A	20.25 V	11.5 Ah
1779738338	74.5 deg.F	13.4 V	1.1 A	19.45 V	10.61 Ah
1779737439	74.5 deg.F	13.4 V	1 A	18.7 V	10.61 Ah
1779736536	74.5 deg.F	13.4 V	1.1 A	19.4 V	10.61 Ah
1779734739	72 deg.F	13.45 V	2.5 A	20.4 V	9.2 Ah
1779734070	70 deg.F	13.45 V	2.3 A	19.65 V	7.64 Ah
1779733836	70 deg.F	13.5 V	5 A	19.75 V	8.4 Ah
1779732936	70 deg.F	13.45 V	2.3 A	19.65 V	7.64 Ah
1779732036	67.5 deg.F	13.5 V	4.2 A	19.5 V	6 Ah
1779730236	67.5 deg.F	13.45 V	1.9 A	20.05 V	4.56 Ah

*Used Equation Coefficients:

BatTemp: 0, 0.5, 0

Bat: 0, 0.05, 10

ChgA: 0, 0.05, 0

Solar: 0, 0.05, 10

Chg: 0.002, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)