This is the latest recevied telemetry packets stored in our database for station/object F6DHI-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762322732 | 152 | 255 | 194 | 0 | 0 |
| 1762320528 | 155 | 255 | 191 | 0 | 0 |
| 1762318322 | 151 | 255 | 192 | 0 | 0 |
| 1762316664 | 151 | 255 | 195 | 0 | 0 |
| 1762314457 | 153 | 255 | 193 | 0 | 0 |
| 1762312803 | 151 | 255 | 199 | 0 | 0 |
| 1762312254 | 151 | 255 | 197 | 0 | 0 |
| 1762311148 | 153 | 255 | 191 | 0 | 0 |
| 1762310599 | 152 | 255 | 192 | 0 | 0 |
| 1762308941 | 155 | 255 | 192 | 0 | 0 |
| 1762307841 | 155 | 255 | 200 | 0 | 0 |
| 1762304529 | 152 | 255 | 194 | 0 | 0 |
| 1762303977 | 152 | 255 | 195 | 0 | 0 |
| 1762303425 | 154 | 255 | 194 | 0 | 0 |
| 1762302877 | 153 | 255 | 191 | 0 | 0 |
| 1762301771 | 152 | 255 | 193 | 0 | 0 |
| 1762300116 | 152 | 255 | 198 | 0 | 0 |
| 1762299567 | 155 | 255 | 196 | 0 | 0 |
| 1762297358 | 151 | 255 | 195 | 0 | 0 |
| 1762295151 | 156 | 255 | 187 | 0 | 0 |
| 1762294600 | 152 | 255 | 191 | 0 | 0 |
| 1762293497 | 154 | 255 | 191 | 0 | 0 |
| 1762292945 | 154 | 255 | 198 | 0 | 0 |
| 1762290186 | 154 | 255 | 189 | 0 | 0 |
| 1762285776 | 154 | 255 | 191 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)