This is the latest recevied telemetry packets stored in our database for station/object F4GCF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | RX_rate* | RelRate* | DrpRate* | Value5* |
|---|---|---|---|---|---|
| 1792137289 | 4.19 VDC | 120 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792136689 | 4.2 VDC | 108 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792136089 | 4.21 VDC | 102 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792135488 | 4.19 VDC | 144 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792134888 | 4.19 VDC | 204 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792134288 | 4.2 VDC | 156 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792133688 | 4.19 VDC | 228 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792133088 | 4.18 VDC | 108 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792132488 | 4.2 VDC | 156 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792131887 | 4.19 VDC | 228 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792131287 | 4.19 VDC | 186 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792130687 | 4.21 VDC | 168 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792130087 | 4.19 VDC | 222 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792129487 | 4.19 VDC | 156 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792128886 | 4.2 VDC | 114 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792128286 | 4.19 VDC | 204 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792127686 | 4.19 VDC | 156 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792127086 | 4.18 VDC | 72 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792126486 | 4.2 VDC | 78 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792125885 | 4.2 VDC | 84 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792125285 | 4.17 VDC | 42 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
| 1792124684 | 4.19 VDC | 48 pkt/h | 0 pkt/h | 0 pkt/h | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)