APRS Track Direct

My position About ☰

reset

VE7EOL-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7EOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Battery*	Temp*
1754080520	12.8 Volts	31.5 Deg.C
1754080367	12.89 Volts	31.5 Deg.C
1754080338	12.86 Volts	31.5 Deg.C
1754080323	12.89 Volts	31.5 Deg.C
1754080226	12.89 Volts	32.48 Deg.C
1754080187	12.89 Volts	32.96 Deg.C
1754079932	12.86 Volts	37.37 Deg.C
1754079921	12.89 Volts	37.37 Deg.C
1754079886	12.89 Volts	37.37 Deg.C
1754079502	12.83 Volts	31.01 Deg.C
1754079494	12.86 Volts	30.52 Deg.C
1754079484	12.86 Volts	30.52 Deg.C
1754079478	12.86 Volts	30.52 Deg.C
1754079145	12.89 Volts	29.54 Deg.C
1754078952	12.83 Volts	29.05 Deg.C
1754078891	12.92 Volts	28.56 Deg.C
1754078749	12.92 Volts	27.59 Deg.C
1754078680	13.04 Volts	27.59 Deg.C
1754078641	13.01 Volts	27.59 Deg.C
1754078538	13.1 Volts	28.56 Deg.C
1754078447	13.19 Volts	29.54 Deg.C
1754073163	13.27 Volts	25.63 Deg.C
1754072933	13.36 Volts	22.7 Deg.C
1754061716	12.95 Volts	25.63 Deg.C
1754061395	13.1 Volts	27.59 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)