APRS Track Direct

My position About ☰

reset

HP3EGD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HP3EGD-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	Eff*
1786747781	13.83 Volt	0 Pkt	42 Pcnt	60 Pcnt
1786747181	13.83 Volt	0 Pkt	42 Pcnt	60 Pcnt
1786746581	13.83 Volt	0 Pkt	42 Pcnt	60 Pcnt
1786745981	13.83 Volt	0 Pkt	42 Pcnt	60 Pcnt
1786745381	13.83 Volt	0 Pkt	100 Pcnt	63 Pcnt
1786744781	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786744181	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786743581	13.59 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786742981	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786742382	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786741782	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786741182	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786740582	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786739982	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786739382	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786738782	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786738182	13.51 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786737582	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786736982	13.83 Volt	0 Pkt	100 Pcnt	62 Pcnt
1786736382	13.83 Volt	0 Pkt	50 Pcnt	62 Pcnt
1786735782	13.83 Volt	0 Pkt	50 Pcnt	62 Pcnt
1786735182	13.83 Volt	0 Pkt	70 Pcnt	62 Pcnt
1786734582	13.83 Volt	0 Pkt	75 Pcnt	62 Pcnt
1786733982	13.83 Volt	10 Pkt	73 Pcnt	62 Pcnt
1786733382	13.83 Volt	10 Pkt	68 Pcnt	62 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)