This is the latest recevied telemetry packets stored in our database for station/object KC1BOS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* | 
|---|---|---|---|---|---|
| 1836274205 | 0.02 Rx Erlang | 0.01 Tx Erlang | 16 count/10m | 3 count/10m | 4 count/10m | 
| 1762269300 | 0.09 Rx Erlang | 0.03 Tx Erlang | 73 count/10m | 9 count/10m | 27 count/10m | 
| 1762268100 | 0.07 Rx Erlang | 0.03 Tx Erlang | 67 count/10m | 8 count/10m | 21 count/10m | 
| 1762266900 | 0.06 Rx Erlang | 0.02 Tx Erlang | 58 count/10m | 11 count/10m | 19 count/10m | 
| 1762265700 | 0.05 Rx Erlang | 0.01 Tx Erlang | 48 count/10m | 5 count/10m | 9 count/10m | 
| 1762264500 | 0.06 Rx Erlang | 0.01 Tx Erlang | 60 count/10m | 5 count/10m | 12 count/10m | 
| 1762263300 | 0.07 Rx Erlang | 0.01 Tx Erlang | 67 count/10m | 4 count/10m | 10 count/10m | 
| 1762262100 | 0.07 Rx Erlang | 0.02 Tx Erlang | 70 count/10m | 6 count/10m | 17 count/10m | 
| 1762260900 | 0.07 Rx Erlang | 0.01 Tx Erlang | 64 count/10m | 9 count/10m | 13 count/10m | 
| 1762259700 | 0.05 Rx Erlang | 0.01 Tx Erlang | 41 count/10m | 3 count/10m | 12 count/10m | 
| 1762258500 | 0.06 Rx Erlang | 0.02 Tx Erlang | 48 count/10m | 3 count/10m | 10 count/10m | 
| 1762257300 | 0.05 Rx Erlang | 0.02 Tx Erlang | 50 count/10m | 1 count/10m | 16 count/10m | 
| 1762256100 | 0.06 Rx Erlang | 0.02 Tx Erlang | 57 count/10m | 3 count/10m | 20 count/10m | 
| 1762254900 | 0.06 Rx Erlang | 0.02 Tx Erlang | 53 count/10m | 4 count/10m | 17 count/10m | 
| 1762253700 | 0.06 Rx Erlang | 0.01 Tx Erlang | 51 count/10m | 2 count/10m | 12 count/10m | 
| 1762252500 | 0.06 Rx Erlang | 0.02 Tx Erlang | 49 count/10m | 1 count/10m | 14 count/10m | 
| 1762251300 | 0.06 Rx Erlang | 0.02 Tx Erlang | 48 count/10m | 4 count/10m | 15 count/10m | 
| 1762250100 | 0.06 Rx Erlang | 0.01 Tx Erlang | 53 count/10m | 4 count/10m | 11 count/10m | 
| 1762248900 | 0.06 Rx Erlang | 0.02 Tx Erlang | 52 count/10m | 1 count/10m | 13 count/10m | 
| 1762247700 | 0.06 Rx Erlang | 0.02 Tx Erlang | 52 count/10m | 5 count/10m | 17 count/10m | 
| 1762246500 | 0.06 Rx Erlang | 0.01 Tx Erlang | 49 count/10m | 3 count/10m | 11 count/10m | 
| 1762245300 | 0.06 Rx Erlang | 0.01 Tx Erlang | 46 count/10m | 5 count/10m | 10 count/10m | 
| 1762244100 | 0.05 Rx Erlang | 0.02 Tx Erlang | 46 count/10m | 4 count/10m | 13 count/10m | 
| 1762242900 | 0.05 Rx Erlang | 0.01 Tx Erlang | 44 count/10m | 2 count/10m | 12 count/10m | 
| 1762241700 | 0.05 Rx Erlang | 0.02 Tx Erlang | 45 count/10m | 3 count/10m | 12 count/10m | 
                        *Used Equation Coefficients:
                    
                    
                        Avg 10m: 0, 0.005, 0                    
                    
                        Avg 10m: 0, 0.005, 0                    
                    
                        RxPkts: 0, 1, 0                    
                    
                        IGateDropRx: 0, 1, 0                    
                    
                        TxPkts: 0, 1, 0                    
                - The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
 - Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
 - The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
 - All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
 - A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)