This is the latest recevied telemetry packets stored in our database for station/object KH6UU-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774406039 | 441 Volts | 630 Deg.F | 275 | 0 | 0 |
| 1774405891 | 435 Volts | 631 Deg.F | 271 | 0 | 0 |
| 1774405777 | 378 Volts | 631 Deg.F | 281 | 0 | 0 |
| 1774405703 | 430 Volts | 631 Deg.F | 278 | 0 | 0 |
| 1774405671 | 438 Volts | 631 Deg.F | 277 | 0 | 0 |
| 1774405592 | 447 Volts | 629 Deg.F | 274 | 0 | 0 |
| 1774405579 | 449 Volts | 629 Deg.F | 271 | 0 | 0 |
| 1774405561 | 449 Volts | 629 Deg.F | 280 | 0 | 0 |
| 1774405544 | 432 Volts | 629 Deg.F | 286 | 0 | 0 |
| 1774404953 | 431 Volts | 631 Deg.F | 274 | 0 | 0 |
| 1774404912 | 435 Volts | 631 Deg.F | 276 | 0 | 0 |
| 1774404890 | 432 Volts | 631 Deg.F | 275 | 0 | 0 |
| 1774404870 | 428 Volts | 630 Deg.F | 281 | 0 | 0 |
| 1774404764 | 429 Volts | 630 Deg.F | 285 | 0 | 0 |
| 1774404623 | 429 Volts | 629 Deg.F | 283 | 0 | 0 |
| 1774404549 | 435 Volts | 629 Deg.F | 281 | 0 | 0 |
| 1774404083 | 426 Volts | 630 Deg.F | 275 | 0 | 0 |
| 1774404070 | 419 Volts | 630 Deg.F | 277 | 0 | 0 |
| 1774403949 | 430 Volts | 629 Deg.F | 260 | 0 | 0 |
| 1774403909 | 459 Volts | 627 Deg.F | 274 | 0 | 0 |
| 1774403902 | 463 Volts | 627 Deg.F | 276 | 0 | 0 |
| 1774403890 | 455 Volts | 627 Deg.F | 280 | 0 | 0 |
| 1774400125 | 425 Volts | 625 Deg.F | 280 | 0 | 0 |
| 1774399715 | 437 Volts | 627 Deg.F | 276 | 0 | 0 |
| 1774399654 | 438 Volts | 627 Deg.F | 274 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)